Click on the image to check the artwork
MHC Hydraulic jack
1This series products have 5 specification ,MHC-2.5RS ,MHC-5RS ,MHC-15RS ,MHC -25RS .Widely used in machinery equipment, bridge construction, railway track of installation and maintenance, and transportation of heavy loading and unloading , automobile tractor repair,ect.
2 This series product is made of high quality steel, after heat treatment and welding, structure simple, easy operate , durable, high quality is stable, safe and reliable; Top and hook lifting combination, easy to low position operation, is a kind of widely used lifting tool.
3, This series product operating handle design for 180 degrees of rotation, according to different places, thus changing the Angle is more convenient to use.
4, Use the machine please pay attention to the follows .
a, The machine should put on a flat place when using , and avoid deflection .
b, It is strictly prohibit the lifting height more than the product requirement limit , or else leading to the Guide fall off from the machine.
C, Forbid the overload operation .
d, Don’t put your finger and feet below the object when using .
5,Before using keep the Guide lubrication ,keep the machine clean ,after use pay attention to put lightly ,not collision and arbitrary throws, if the bad thing occurs it will leading to damage and oil circuit malfunction .
Main Parameter
Model Overall size
(mm)
Hook
Mini height (mm) Lifting height (mm) Rated capacity (T) Weight (kg)
TOP HOOK
MHC-2.5RS 210X140X232 16 115 5 2.5 11
MHC-5RS 260X200X283 20 148 10 5 24
MHC-10RS 295X220X322 25 158 20 10 36
MHC-15RS 305X255X350 30 158 30 15 55
MHC-25RS 340X285X350 50 158 50 25 75
MHC claw type hydraulic jack